EP059506
COCOON PA-Birch(CF) is a carbon fiber reinforced heat-resistant PA6 filament that offers great heat resistance, impact resistance, oil and abrasion resistance, and electrical insulation. It has a heat deflection temperature of 190°C. The surface of the printed products has a good quality, presenting a matte and sand-like texture. It is suitable for use in 3D printed gears, bearings, pump impellers, fasteners, oil-resistant gaskets, and other industrial load-bearing structural parts or tooling fixtures.
Nozzle Temperature: 280-300℃
Build Plate Temp.: 100℃
Build Plate Material: Glass、PEI、Steel Spring Build Plate
Bottom Layer Printing Temp.: 280℃
Enclosed-chamber Printing: yes
Print Speed: 40-70mm/s
Drying recommendations: 100-120°C in a hot air dryer for 6-8hours
Tensile Strength(X-Y): 111MPa
Tensile Strength(Z): 23MPa
Flexural Strength: 154MPa
Flexural Modulus: 5800MPa
Impact Strength, Notched: 19kJ/m2 HDT: 190℃
