EP061010(2)
It is an ABS material supporting high-speed and open printing. With high fluidity and low heat capacity, it can realize the rapid melting and cooling of the material, effectively maintaining the details of the effect of high-speed printing. Printing speed in high-speed printers can reach a maximum of 200mm/s. The heat-resistant temperature of the printed parts can reach 80~82℃, taking into account the printing efficiency, printing performance, heat-resistant performance and convenience of operation. At the same time, it has excellent mechanical properties and reliable dimensional stability. It is widely used in toys and blocks, electronic and electrical shell parts, industrial parts and fixtures.
Nozzle Temperature: 260-290℃
Build Plate Temp.: 80-90℃
Build Plate Material: Glass、PEI、Steel Spring Build Plate
Bottom Layer Printing Temp.: /
Enclosed-chamber Printing: Support open printing / Enclosed printing provides better results
Print Speed: 100-200mm/s
Drying recommendations: 60 °C in a hot air dryer for 4hours
Tensile Strength(X-Y): 45MPa
Tensile Strength(Z): 26MPa
Flexural Strength: 63MPa
Flexural Modulus: 2200MPa
Impact Strength, Notched: 4kJ/m2
