EP071010
It is a high-speed printing ASA material with a maximum printing speed of 300mm/s and supports open printing. It offers high fluidity, enabling easy printing while maintaining fine details and smooth surfaces even at high speeds. The printed components exhibit excellent impact resistance, weather resistance, anti-yellowing, aging resistance, as well as good anti-cracking and warping resistance. They are durable and suitable for end products with specific weather resistance requirements such as automotive interior parts, garden furniture, and outdoor leisure buildings.
Nozzle Temperature: 270℃
Build Plate Temp.: 90℃
Build Plate Material: Glass、PEI、Steel Spring Build Plate
Bottom Layer Printing Temp.: /
Enclosed-chamber Printing: Support open printing / Enclosed printing provides better results
Print Speed: 100-300mm/s
Drying recommendations: 60°C in a hot air dryer for 4hours
Tensile Strength(X-Y): 40MPa
Tensile Modulus( X-Y): 1900MPa
Tensile Strength(Z): 23MPa
Tensile Modulus (Z): 1700MPa
Flexural Strength: 52MPa
Flexural Modulus: 2000MPa
Impact Strength, Notched: 30kJ/m2
HDT: 83°C
