EP061016
It is a low-odor ABS material that supports open-environment printing. It retains the advantages of ABS while adopting a low-odor formulation that is more environmentally friendly. Some models can be printed without an enclosed chamber, ensuring high-quality results, achieving a balance between low odor and ease of printing. The material is also impact-resistant, creep-resistant, abrasion-resistant, and chemically resistant, with a heat resistance of up to 88°C. It is suitable for 3D printing applications such as automotive interior parts, industrial design prototypes, and consumer product housings.
Nozzle Temperature: 230-280℃
Build Plate Temp.: 80-100℃
Build Plate Material: Glass、PEI、Steel Spring Build Plate
Bottom Layer Printing Temp.: /
Enclosed-chamber Printing: Support open printing / Enclosed printing provides better results
Print Speed: 60-200mm/s
Drying recommendations: 60°C in a hot air dryer for 4hours
Tensile Strength(X-Y): 42MPa
Tensile Modulus( X-Y): 1900MPa
Tensile Strength(Z): 25MPa
Tensile Modulus (Z): 1700MPa
Flexural Strength: 58MPa
Flexural Modulus: 1850MPa
Impact Strength, Notched: 27kJ/m2
Heat Deflection Temperature: 88℃
